VCS Micro Mount for Factory Holes

$90.00

Add an Aimpoint Micro-pattern optic to your factory drilled and tapped shotgun receiver.
The Vang Comp Micro Mount was designed to mount an Aimpoint Micro pattern optic as low-profile as possible, using the factory-supplied holes.

  • Lowest height-over-bore for Aimpoint Micro-pattern optics (without permanent modifications to the firearm)
  • Allows co-witness with Trak-Lock II Ghost Ring Sights (optic depending)
  • No additional interface weight or fasteners to worry about
  • Compatible with any optic that is designed to mount to an Aimpoint Micro footprint, including but not limited to:  Aimpoint Micro T1/H1, T2/H2/Duty RDS, Vortex Sparc/Crossfire, Holosun 403/503, SIG Romeo 5/4/MSR, etc.
  • Made in the USA
  • Billet 6061-T6 aluminum
  • MIL-A-8625 anodize
  • Discreet branding
  • Optic Mount Screws included (requires 5/64″ hex driver or key, not included)
  • Receiver Mount Screws included
  • Weight: 1 oz.

NOTE: Fasteners provided are intended for use on a pump-action shotgun. Installing this optic mount with the supplied receiver mount screws onto a semi-auto shotgun may cause damage to the barrel.  Recommend professional gunsmith installation.
Obviously, no optic is included in this purchase, just the mount. 

SKU: N/A Category:

Vang Comp Systems has been installing red dot optics on shotguns for over 20 years.
We have seen the trends of “co-witness” and “Quick Detach” cycle in and out of fashion.  Both have their merits.
Red dot optics have come a long way in the last 20 years and now they are widely considered to be as durable, if not more so, than iron sights.
Red dot sights are no longer the future, they are the now.

This new direct-mount option mounts to the shotgun using the drilled and tapped holes provided by the factory.
It eliminates the height of both the Picatinny rail on the receiver and the optic’s Picatinny mount.  The lower overall mounting height keeps the optic closer to the barrel (height-over-bore) providing for a lower-profile install and a more natural cheek weld when sighting.
Most of the people who have sighted shotguns with this optic mount installed do not require cheek risers to achieve a natural point of aim.
Most optics with side-mount batteries can actually achieve a co-witness with the popular “Trak-Lock II” ghost ring sights.

Weight 1 oz
Shotgun Make & Model

Remington 870 (4- & 3-Hole pattern), Mossberg 500/590 (4-hole pattern)

1 review for VCS Micro Mount for Factory Holes

  1. Barry Zane II (verified owner)

    Another great piece of gear from Vang. This mount hugs the receiver nice and low. A green Holosun 503 fits perfectly. Good quality part and a good price so that even us poors can get some cool guy gear.

Add a review

Your email address will not be published. Required fields are marked *

Scroll to Top